Erosion Control Material
Woven Geotextile 315ST
When using woven erosion control material, you are using a product of excellence. Made from polypropylene slit film, it is resistant to chemicals commonly found in soils and standard biological degradation. The additives used for maximum UV resistance add to the properties that give this material a long successful life.
Woven geotextile 315ST meets AASHTO M288 Class I Standards. It has high tensile strength with low elongation to stand up to the rigors of installation and long term performance. This erosion controm material will outperform conventional methods like chemical stabilization, undercutting and removal, and thicker aggregate layers, while saving you money initially and down the road.
Our friendly staff is here to help you get the exact product you need!.
315ST Features
|
315ST Benefits
|
Erosion Control Material Applications
- Stabilization
- Separation
- Road Construction
Geotextile 315ST Technical Specifications
| Property | Test Method | English | Metric |
|---|---|---|---|
| Tensile Strength (Grab) | ASTM D-4632 | 315 lbs | 1400 N |
| Elongation | ASTM D-4632 | 12% | 12% |
| Puncture | ASTM D-4833 | 150 lbs | 667 N |
| CBR Puncture | ASTM D-6241 | 900 lbs | 4000 N |
| Mullen Burst | ASTM D-3786 | 600 psi | 4137 kPa |
| Trapezoidal Tear | ASTM D-4533 | 120 lbs | 533 N |
| UV Resistance % Retained at 500 hrs | ASTM D-4355 | 70% | 70% |
| Apparent Opening Size (AOS) | ASTM D-4751 | 40 US Std. Sieve | 0.425 mm |
| Permittivity | ASTM D-4491 | 0.05 sec-1 | 0.05sec-1 |
| Water Flow Rate | ASTM D-4491 | 4 gpm/ft² | 160 l/min/m² |
| Roll Sizes | |||
| 12.5' x 360' / 3.81 m x 109.8 m | |||
| 15.0' x 300' / 4.57 m x 91.5 m | |||
| 17.5' x 258' / 5.33 m x 78.6 m | |||
|
||
 |
 |
 |
| Woven Geotextiles: W200 | Woven Geotextiles: W250 | Woven Geotextiles: W180 |
Questions about erosion control material? We can help! Call our team at 1-863-261-8388 or fill out our quote request form to discuss your requirements.