Polypropylene Geotex® 4 x 4 HF
For an effective reinforcement soil product, look no further than the Geotex® 4x4 Polypropylene Geotextile! Made using high quality yarns that have been woven in a twill pattern, these geotexiles offer the structural design and strength to successfully reinforce your area.
Strong enough to be used in a variety of applications, including reinforcement of soils on steeper slopes, wrapped face retaining walls, and construction of embankments, these geotextiles are an easy and cost-effective solution to your erosion control problems.
Materials used for these reinforcement soil geotextiles have a high resistance to UV exposure making them suitable for outdoor use.
If you have questions about products, give us a call at (+1) 772.646.0597 or toll free at (+1) 888.703.9889 or request a price quote.
- UV Resistant
- Woven Polypropylene Geotextile
- Resistant to Degratation due to Elements Found in Soils
- Helps Prevent Erosion on your Site
- Can Contribute to Revegetation Efforts
- Strengthens Soil
Typical Erosion Control Applications:
- Modular Block Walls
- Reinforcement of Slopes and Banks
- Slope Revegetation
- Soil Reinforcement
Soil Reinforcement Technical Specifications
|Tensile Strength (Grab)||ASTM D-4632||475 x 440 lbs.||2113 x 1957 N|
|Elongation||ASTM D-4632||12 x 6%||12 x 6%|
|Wide Width Tensile||ASTM D-4595||4800 x 4800 lbs/ft||70 x 70 kN/m|
|Wide Width Elongation||ASTM D-4595||9 x 9%||9 x 9%|
|Wide Width Tensile Strength at 5% Strain||ASTM D-4595||2400 x 2600 lbs/ft||35 x 38 kN/m|
|Puncture||ASTM D-4833||195 lbs.||867 N|
|Mullen Burst||ASTM D-3786||1200 psi||8270 kPa|
|Trapezoidal Tear||ASTM D-4533||180 x 180 lbs.||801 x 801 N|
|UV Resistance % Retained at 500 hrs.||ASTM D-4355||80%||80%|
|Apparent Opening Size (AOS)3||ASTM D-4751||30 US Std. Sieve||0.600 mm|
|Permittivity||ASTM D-4491||0.40 sec -1||0.40 sec -1|
|Water Flow Rate||ASTM D-4491||30 gpm/ft2||1222.2 l/min/m2|
|15 ft x 300 ft/ 4.57 m x 91.5 m|