Call Us: 555-555-1234

Woven Geotextile

250 lbs. Grab Tensile Strength

Woven Geotextile 250ST

The Woven Geotextiles featured here is one of our highest strength and most long-lasting erosion control options. Built with a reliable grab tensile strength of approximately 250 lbs., these geotextiles are the perfect option for unpaved road support, chemical stabilization, and undercutting. woven geotextile

This geotextile is made from a woven polypropylene slit film, forming a strong fabric to withstand installation stresses. The natural properties of polypropylene make the material resistant to biological rotting and chemical degradation. It also features an additive for maximum UV resistance.

Features:

  • Fabric: Woven Polypropylene Slit Film
  • Grab Tensile Strength: 250 lbs.
  • Dimensional Stability
  • Low Elongation
  • High Tensile Strength
  • Meets AASHTO M288 Class II Standards


Benefits:

  • Cost Effectivewoven geotextiles
  • Outperforms Conventional Methods
  • Reduces Aggregate Thickness by 50% (when used with unpaved roads)
  • Chemical, UV, Rot Resistant

Typical Erosion Control Applications:

  • Separation
  • Stabilization
  • Unpaved Road Construction

If you have questions about our products give us a call at +1-772-646-0597 or request a price quote.


Geotex® 250ST Technical Specifications

MARV
Property Test Method English Metric
Mechanical
Tensile Strength (Grab) ASTM D-4632 250 lbs 1110 N
Elongation ASTM D-4632 12% 12%
Puncture ASTM D-4833 110 lbs 489 N
CBR Puncture ASTM D-6241 750 lbs 3335 N
Mullen Burst ASTM D-3786 500 psi 3447 kPa
Trapezoidal Tear ASTM D-4533 90 lbs 400 N
Endurance
UV Resistance % Retained at 500 hrs ASTM D-4355 70% 70%
Hydraulic
Apparent Opening Size (AOS) ASTM D-4751 40 US Std. Sieve 0.425 mm
Permittivity ASTM D-4491 0.05 sec-1 0.05sec-1
Water Flow Rate ASTM D-4491 4 gpm/ft² 160 l/min/m²
Roll Sizes
12.5' x 360' / 3.81 m x 109.8 m
17.5' x 258' / 5.33 m x 78.6 m

Geotextile Product Line

Geotextiles are an extremely versatile product and feature several different strengths as well as construction to accommodate the requirements of your location. In general, geotextiles are offered in two different models: Woven and Non Woven Geotextiles.

The woven fabrics are typically known for their strength and are designed for use underneath rip rap, roads or rocks. The nonwoven geotextiles, by contrast, are known for their filtration ability and are often used around drains or other areas requiring water filtration. For information regarding our geotextile variety, check out our Non Woven & Woven Geotextiles Page.

Customers Who Viewed This Product Also Viewed:

200 woven geotextile fabric
Geotextiles Woven: W200

erosion control material
Geotextiles for
Erosion Control
: 315ST

geotextiles woven
Geotextiles: W180