Erosion Control Geotextile
Geotextile Woven M706
M706 Monofilament Geotextile
Using an erosion control geotextile greatly increases the growth of vegetation, and ultimately, successful control of erosion on slopes and banks alike. Made from 100% polypropylene, the monofilament fibers are delicately woven for optimal strength, support, and separation.
These erosion control geotextiles, being woven, allow for adequate water flow and permittivity while still sufficiently holding seeds, seedlings, and soil in place. This provides a stable ground for roots to grow, develop, and establish, which results in effective control of eroded soils.
 |
If you have questions about products, give us a call at (+1) 772.646.0597 or toll free at (+1) 888.703.9889 or request a price quote. |
Features:
- Woven Polypropylene
- Monofilament Fibers
- 0.28 Sec-1 Permattivity
- 18 gpm/ft2 Water Flow
Benefits:
- Balanced Separation and Strength
- UV Resistant
- 370 x 250 lbs Grab Tensile Strength
- Supports Vegetation Growth
Typical Erosion Control Applications:
- Stabilization
- Reinforcement
- Vegetation Growth
Woven Geotextile M706 Technical Specifications |
|||
| Property | Test Method | Unit | Minimum Average Roll Value (M.A.R.V.) |
| Weight (typical) | ASTM D5261 | oz/yd2 (g/m2 | 5.6 (190) |
| Grab Tensile | ASTM D4632 | lbs (kN) | 370 x 250 (1.65 x 1.11) |
| Grab Elongation | ASTM D4632 | % | 16 x 15 |
| Trapezoid Tear Strength | ASTM D4533 | lbs (kN) | 100 x 60 (.444 x .267) |
| Puncture Resistance | ASTM D4833 | lbs (kN) | 120 (.53) |
| Permattivity* | ASTM D4491 | sec-1 | 0.28 |
| Water Flow* | ASTM D4491 | gpm/ft2 (l/min/m<SUP2) | 18 (733) |
| A.O.S* | ASTM D4751 | U.S. Sieve(mm) | 70 (.212) |
| UV Resistance | ASTM D4355 | %/hrs | 90/500 |
| Packaging | Details | ||
| Roll Dimensions (W x L) - ft | 12 x 300 | ||
| Square Yards per Roll | 400 | ||
| Estimated Roll Weight - lbs | 155 | ||
|
|||||
